Cyberheart
Mar 15, 06:00 AM
http://img141.imageshack.us/img141/2261/screenshot20110315at358.png (http://img141.imageshack.us/i/screenshot20110315at358.png/)
For the n00bs hold down CMD+Shift+3
For the n00bs hold down CMD+Shift+3
enigma2k
Mar 23, 06:17 PM
How likely is it that Apple is holding back the groundbreaking new features or GUI changes?
I myself think there won't be any GUI changes from the developer version, but maybe some new features that make people go "wow".
As I am new to the Mac I would like to know what's the experience with previous Mac OS launches. Does Apple wait for the final version with the big changes?
I myself think there won't be any GUI changes from the developer version, but maybe some new features that make people go "wow".
As I am new to the Mac I would like to know what's the experience with previous Mac OS launches. Does Apple wait for the final version with the big changes?
bobblaine
Sep 22, 03:59 PM
I love mine, its less rubbery and dest collecting compared to the zagg and its coverage is amazing
Will Cheyney
Dec 4, 12:58 PM
If it's not a Dreamweaver template (which I'm 99% sure it is) then it is simply a Macromedia.com rip-off (in terms of design).
Still, nicely done :)
Still, nicely done :)
more...
Blue Sun
Feb 17, 02:56 AM
NIN - And all that could've been
Porcupine Tree - Arriving Somewhere
Porcupine Tree - Arriving Somewhere
MacRumorUser
Aug 7, 07:12 AM
it's so sad. in the last few weeks i've seen several apple macbooks get more action than me. :o :(
LOL! Was thinking the same.
Great pic iBlue, it's really classy.
LOL! Was thinking the same.
Great pic iBlue, it's really classy.
more...
maceleven
Jan 13, 01:42 AM
Apple and several other companies began lobbying the Federal Communications Commission, which regulates use of the airwaves in the
nick1516
Oct 9, 10:30 PM
The Unforgiven
http://www.youtube.com/watch?v=-vcd95yxQxs
http://www.youtube.com/watch?v=-vcd95yxQxs
more...
olternaut
Jan 14, 11:14 AM
I've commanded my boss and my co-workers to not surf any news sites or listen to any radio stations till after I get home and I watch they keynote. They have decided to comply because they do not want to face my wrath!!! :mad:
p.s. I'm half tempted to extend my commandment an extra day til Apple posts the high res version at that!!
p.s. I'm half tempted to extend my commandment an extra day til Apple posts the high res version at that!!
Abstract
Jun 16, 04:16 AM
I'd love to have a place for flamewars as well. Some place to vent, call each other names, and just bash everyone and everything you think is dumb, or extremely frustrating.
whats your problem :eek: you know some people dont want to die alround here or have there house burned down :p
*grabs for his pitchfork and torch*
whats your problem :eek: you know some people dont want to die alround here or have there house burned down :p
*grabs for his pitchfork and torch*
more...
tomozj
Jul 23, 09:13 PM
Haha, can't wait!
http://storage.tomozj.com/skitch/Downloads-20100724-031243.png
http://storage.tomozj.com/skitch/Downloads-20100724-031243.png
Telp
Jan 10, 05:42 PM
If i could come, i would come, however i cant, but i wish i could. Have fun everyone thats going!!
more...
mgartner0622
Apr 8, 07:52 PM
Hello-
I recently sold my old 2.4GHz i5 15" 2010 MacBook Pro on ebay.
The buyer claims he is not satisfied, and wants a return, as it is a "core 2 duo" machine and does not have multiple cores... What I sent him was exactly what I described, a core i5 machine from 2010...
What do you advise I do? I've already sent off an email saying to go and check About This Mac and the sort. I really have no clue what to do at this point.
Thanks!
I recently sold my old 2.4GHz i5 15" 2010 MacBook Pro on ebay.
The buyer claims he is not satisfied, and wants a return, as it is a "core 2 duo" machine and does not have multiple cores... What I sent him was exactly what I described, a core i5 machine from 2010...
What do you advise I do? I've already sent off an email saying to go and check About This Mac and the sort. I really have no clue what to do at this point.
Thanks!
rushad0
May 6, 06:20 AM
instructions in my last post worked perfectly. if anyone needs help, now i can assist!!
more...
jaekyon
Dec 12, 08:31 PM
I know you have to re-jailbreak everytime you reboot or run out of battery, but does this include restarting springboard?
Johannesson
Apr 26, 10:49 AM
I bought two of these, one for me, one for my wife. In a random fashion, either the left ear or the right ear will "go deaf". Occasionally both ears will "go deaf". My wife's jack is so loose that it simply separates from the nano with the slightest movement! I get the same problems when I use my Bose earphones. The reason seems to be that the audio jack ports on this product have been manufactured without adequate attention to quality control. Short of returning the nanos, can you think of a solution?
more...
OSMac
Feb 21, 07:35 AM
Says it's Not compatible with current firmware, also it does not seem to be for an iPad?
neoelectronaut
Oct 20, 09:04 PM
Is there perhaps stand-alone MP3 software for the PS2?
I know Blaze created a MP3 app for the Dreamcast during it's lifespan. Put the app CD in, boot it up, then swap it out with an MP3 disc, and you can play all the Mp3s on it.
There are also some freeware DC apps that do the same, and even play really obscure file formats such as OGG and .nsf.
I know Blaze created a MP3 app for the Dreamcast during it's lifespan. Put the app CD in, boot it up, then swap it out with an MP3 disc, and you can play all the Mp3s on it.
There are also some freeware DC apps that do the same, and even play really obscure file formats such as OGG and .nsf.
tekkierich
Feb 18, 10:55 AM
Hi Guys & Gals,
I'm going to make the jump to an Intel SSD this weekend to replace my stock 320GB (5400 RPM) Drive in the 2010 Mac Mini.
Those of you that have actually done this, did you find that the Logic Board really needed to be shifted at all? I've been looking at the OWC installation Video and it would seem to me that the drive will lift out over the Logic Board without moving the board at all. It would mean that I would only have to detach the first SATA and two heat connectors. The least amount of connectors I have to pull the better I would assume. Also, I'm thinking that the black vinyl covering wrapped around the 320GB drive is there to protect the moving/electrical drive components on the bottom of the drive, which I would not need on the SSD. I know that I need/should replace the piece of tape to hold the heat sensor wire on the new SSD.
Any help would be great.....:)
2010 Mac Mini (2.4MHz - 8GB RAM Intel 80GB SSD(pending)) Air Port Extreme, 2TB Mini Stack External Dive, 16GB WiFi iPad, 32GB iPhone 3GS.
I have not done an SSD per say, but I have made a little side business upgrading the hard drive on 2010 Mac Mini's and selling them on ebay. After having done 10 or so of these, yes you do need to pull the logic board out slightly. The hard drive will not lift up enough to give you the angle you need clear the logic board with out pulling it out.
That said, only pull it out enough to see a small gap of air between the black beisl in the rear and the alum case.
WRT the heat sensors... I have found that the smallest amount of rubber cement works well if you you loose the adhesive when transferring the sensor. 8/10 times you will have plenty of stick left though and wont need to add any.
The black cover I have also assumed was there for air flow as well. If the SSD has a smooth surface, and no logic board to short, you probably can do away with it.
I'm going to make the jump to an Intel SSD this weekend to replace my stock 320GB (5400 RPM) Drive in the 2010 Mac Mini.
Those of you that have actually done this, did you find that the Logic Board really needed to be shifted at all? I've been looking at the OWC installation Video and it would seem to me that the drive will lift out over the Logic Board without moving the board at all. It would mean that I would only have to detach the first SATA and two heat connectors. The least amount of connectors I have to pull the better I would assume. Also, I'm thinking that the black vinyl covering wrapped around the 320GB drive is there to protect the moving/electrical drive components on the bottom of the drive, which I would not need on the SSD. I know that I need/should replace the piece of tape to hold the heat sensor wire on the new SSD.
Any help would be great.....:)
2010 Mac Mini (2.4MHz - 8GB RAM Intel 80GB SSD(pending)) Air Port Extreme, 2TB Mini Stack External Dive, 16GB WiFi iPad, 32GB iPhone 3GS.
I have not done an SSD per say, but I have made a little side business upgrading the hard drive on 2010 Mac Mini's and selling them on ebay. After having done 10 or so of these, yes you do need to pull the logic board out slightly. The hard drive will not lift up enough to give you the angle you need clear the logic board with out pulling it out.
That said, only pull it out enough to see a small gap of air between the black beisl in the rear and the alum case.
WRT the heat sensors... I have found that the smallest amount of rubber cement works well if you you loose the adhesive when transferring the sensor. 8/10 times you will have plenty of stick left though and wont need to add any.
The black cover I have also assumed was there for air flow as well. If the SSD has a smooth surface, and no logic board to short, you probably can do away with it.
WillEH
Apr 8, 08:09 PM
Sounds fishy. I'm guessing he will dispute. If you are 100% sure you sent him i5, I wouldn't let him try and fool you. If you have serial number you should be okay. But I have never come across this sort of "scam" before. Crazy. It's best to contact eBay and ask them what to do.
alust2013
Jan 29, 03:42 PM
If you've got the matter/silver ones, then you'll just need a miniDisplayPort to DVI adapter as well as an HDMI male to DVI female adapter
SchneiderMan
Feb 10, 12:56 AM
Come on we all know that Apple now sells the iHomeless.
Bad I know :eek::p
Bad I know :eek::p
notjustjay
Feb 11, 02:59 PM
I now use WordPress for my site, after trying to get used to Joomla, CMS Made Simple, Silver Stripe, and a few home brew solutions. WordPress as a CMS is great for very simple stuff, but the more complex you get, the less suitable it becomes. There are plugins that extend its functionality in all kinds of ways, but it begins to feel like a Rube Goldberg machine if you are trying to get to something very specific by throwing two or three plugins together.
Having said that, the site I maintain is fairly simple and needs to be administer-able (is that a word?) by people with limited IT knowledge, so WordPress fits the bill.
Having said that, the site I maintain is fairly simple and needs to be administer-able (is that a word?) by people with limited IT knowledge, so WordPress fits the bill.
AirmanPika
Jan 16, 09:00 PM
OK we know apple supposedly has some kind of super secret planned for the Final Cut meet thats supposed to begin in a few minutes...
Now, I'm going to make my own personal leap of logic here based on rumblings over the last few weeks.
Touch screen tablet, newton 2, multitouch tablet.
Now here we have final cut.
Even though the product isn't exactly geared towards just that I can almost see some kind of Wacom Cintiq apple device. Multitouch gestures, pen input for graphics editing, tablet format. Basicly a handheld multimedia editing platform for pros. Maybe would need to link to a Mac Pro as it won't itself be able to process the graphics of an HD Video or something similarly intensive.
Yea I know my head is in the clouds but it would be a fun toy.
Now, I'm going to make my own personal leap of logic here based on rumblings over the last few weeks.
Touch screen tablet, newton 2, multitouch tablet.
Now here we have final cut.
Even though the product isn't exactly geared towards just that I can almost see some kind of Wacom Cintiq apple device. Multitouch gestures, pen input for graphics editing, tablet format. Basicly a handheld multimedia editing platform for pros. Maybe would need to link to a Mac Pro as it won't itself be able to process the graphics of an HD Video or something similarly intensive.
Yea I know my head is in the clouds but it would be a fun toy.
No comments:
Post a Comment