cube
May 4, 11:48 AM
OK, I can power an FW400 drive from FW800. I think it was my FW400 repeater hub that couldn't be powered.
I imagine an FW800 drive can be powered from FW400, too.
I imagine an FW800 drive can be powered from FW400, too.
sparkyms
May 1, 05:56 AM
Here's mine with just a green bumper on it..
oh and for reference that's not my leg, it's the arm of my sofa..
oh and for reference that's not my leg, it's the arm of my sofa..
Nereus
Dec 16, 05:37 PM
Without knowing more about your situation, I would suggest that you re-setup your airport from your PB15 using the utility.
Of course you will need to know the original settings for your ISP before you try this.
Sushi
How do I re-setup it? The problem seems to be that it can't find any networks anymore. The reception is zero.
Of course you will need to know the original settings for your ISP before you try this.
Sushi
How do I re-setup it? The problem seems to be that it can't find any networks anymore. The reception is zero.
maturola
Mar 3, 08:39 AM
I know we'll know for sure real soon, but I was just wondering if there's any expectation one way or the other regarding how likely the ipad2 will be jailbreak-able, either with the current apps or with current known but unused exploits.
way , way wayyyyyyyyyyy too early to tell, iPad2 is a whole new device, new processor, new firmware (with new drivers to support the new devices), new interfaces, new internal devices, most of drivers are going to be updated, HDMI out support, so all those changes mean that pretty much anything we curretnly have is pretty much useless, until someone can get their hands on it and on the 4.3 GM release, there isn't much work that can be done.
way , way wayyyyyyyyyyy too early to tell, iPad2 is a whole new device, new processor, new firmware (with new drivers to support the new devices), new interfaces, new internal devices, most of drivers are going to be updated, HDMI out support, so all those changes mean that pretty much anything we curretnly have is pretty much useless, until someone can get their hands on it and on the 4.3 GM release, there isn't much work that can be done.
more...
ericstjohn
Apr 27, 10:00 PM
Hi. I'm wondering if mixing and matching even Apple production apps affects their compatibility? Moving "up" to a Mac has been a bubble-buster since I discovered the dark side of legacy software and machines in an "upgraded to Intel" world.:mad:
I have a "Late '05" 2.3 dual core PPC 10.5.8 Leopard that came loaded from eBay with all the bells and whistles, assembled, apparently, from a grab bag and I have no disks for the uninstalling and reinstalling tricks.
FCP is version 5.0.4, Compressor is 2.0.1, Logic Studio is 8.0.1, iDVD is 7.0.4 and DVD Studio is 3.0.2. (Do all these fit together? Looks like a production suite made from the parts box. LOL!)
I have Toast 10 Titanium too.
The reason I mention that is, I'm having not only exporting problems with Compressor, quality problems exporting in Quicktime Conversion to AVI, but also burning issues with DVDs that won't play in the living room deck.
Compressor 2 gives me the now-famous Cannot Submit Batch message. I've tried all sorts of fixes -yes, even the Compressor Repair that's made for Compressor 3 and above. Again the legacy thing. After googling for more tricks, I have discovered Compressor 2's "preference file" is missing from Home>Library>Preferences. Hmmm. Maybe a new Compressor is in order? Which version should I install since I have all this mixed bag of wares?
So, Toast won't play, iDVD won't play, Compressor won't compress and AVI from Quicktime Conversion looks like crap. (I understand Toast 9 has good reports but since they "improved" it, I have no use for it. Again, the legacy.)
iDVD let me assemble and burn a DVD but it doesn't play properly. I made an .iso in there and burned it with Disk Utility. The deck plays the menu but I won't know anything else until I find the flippin' remote! That's something to remember though: burning in Disk Utility. That and finding the remote.
I can't even use DVD Studio until I figure out how to import and burn iDVD projects because of the issues between FCP and Compressor. So we're back to square one. FCP>Compressor won't work and it messes me up with FCP>DVDSP. Too bad. I like the Apple production apps but I'm about ready to jam CS4...
I have a "Late '05" 2.3 dual core PPC 10.5.8 Leopard that came loaded from eBay with all the bells and whistles, assembled, apparently, from a grab bag and I have no disks for the uninstalling and reinstalling tricks.
FCP is version 5.0.4, Compressor is 2.0.1, Logic Studio is 8.0.1, iDVD is 7.0.4 and DVD Studio is 3.0.2. (Do all these fit together? Looks like a production suite made from the parts box. LOL!)
I have Toast 10 Titanium too.
The reason I mention that is, I'm having not only exporting problems with Compressor, quality problems exporting in Quicktime Conversion to AVI, but also burning issues with DVDs that won't play in the living room deck.
Compressor 2 gives me the now-famous Cannot Submit Batch message. I've tried all sorts of fixes -yes, even the Compressor Repair that's made for Compressor 3 and above. Again the legacy thing. After googling for more tricks, I have discovered Compressor 2's "preference file" is missing from Home>Library>Preferences. Hmmm. Maybe a new Compressor is in order? Which version should I install since I have all this mixed bag of wares?
So, Toast won't play, iDVD won't play, Compressor won't compress and AVI from Quicktime Conversion looks like crap. (I understand Toast 9 has good reports but since they "improved" it, I have no use for it. Again, the legacy.)
iDVD let me assemble and burn a DVD but it doesn't play properly. I made an .iso in there and burned it with Disk Utility. The deck plays the menu but I won't know anything else until I find the flippin' remote! That's something to remember though: burning in Disk Utility. That and finding the remote.
I can't even use DVD Studio until I figure out how to import and burn iDVD projects because of the issues between FCP and Compressor. So we're back to square one. FCP>Compressor won't work and it messes me up with FCP>DVDSP. Too bad. I like the Apple production apps but I'm about ready to jam CS4...
dutchchilly
Apr 6, 04:28 AM
Hi guys,
I'm working on a Space Invaders testcase.
You know those barriers right? Where you can hide behind and shoot a hole through? That's what I want to achieve.
Is it possible to do a collisiondetection pixelwise? And make a series of pixels of that sprite transparent after collision?
I'm using Cocos2d by the way.
Cheers
I think I'll have to go with a custom MutableTexture2d for fast getting and setting of pixels:
http://www.cocos2d-iphone.org/forum/topic/2449
My idea is:
- First do a pixel perfect collision detection using the pixelAt function
- If there's a collision do a 'sprite merge' with one sprite being an impact-radius sprite and of course the barrier sprite using setPixelAt.
Hope that's going to work out (performance).
Any other thoughts on the subject are very welcome.
Cheers
I'm working on a Space Invaders testcase.
You know those barriers right? Where you can hide behind and shoot a hole through? That's what I want to achieve.
Is it possible to do a collisiondetection pixelwise? And make a series of pixels of that sprite transparent after collision?
I'm using Cocos2d by the way.
Cheers
I think I'll have to go with a custom MutableTexture2d for fast getting and setting of pixels:
http://www.cocos2d-iphone.org/forum/topic/2449
My idea is:
- First do a pixel perfect collision detection using the pixelAt function
- If there's a collision do a 'sprite merge' with one sprite being an impact-radius sprite and of course the barrier sprite using setPixelAt.
Hope that's going to work out (performance).
Any other thoughts on the subject are very welcome.
Cheers
more...
cubist
Mar 20, 09:21 AM
We are in a time of transition. Soon, there will be dozens of USB/DVI KVMs which work perfectly. At this time, though, KVMs are mostly VGA/PS2.
You can get adapters which convert PS2 to USB and the other way quite cheaply. I've used an old Master Console for years this way. I must note, however, that I wasn't able to get the Apple keyboard to talk to the Master Console with a USB-to-PS2 adapter. Newer models may work better.
The best bet might be to use one of the little $90 jobs temporarily, and plan to get a new KVM in a year or two when better models are available. If you can't get the Apple KB to work thru an adapter, make sure you get a PS2 keyboard that has the Windows key, as that will become your cloverleaf key. F12 is eject.
You can get adapters which convert PS2 to USB and the other way quite cheaply. I've used an old Master Console for years this way. I must note, however, that I wasn't able to get the Apple keyboard to talk to the Master Console with a USB-to-PS2 adapter. Newer models may work better.
The best bet might be to use one of the little $90 jobs temporarily, and plan to get a new KVM in a year or two when better models are available. If you can't get the Apple KB to work thru an adapter, make sure you get a PS2 keyboard that has the Windows key, as that will become your cloverleaf key. F12 is eject.
Mike1980
Jun 18, 05:21 AM
Yeah huge probems, Starbucks filer coffee was plentiful though and the odd cupcake from the cloud hotspot people.
So what time then 7? And where just outside?
facebook.com/michaelbrearley is me
Also... FYI i came across this:
http://forums.macrumors.com/showthread.php?p=7861620&posted=1#post7861620
To enable tethering in 3.0! I know off topic but I thought it was worth it! :)
So what time then 7? And where just outside?
facebook.com/michaelbrearley is me
Also... FYI i came across this:
http://forums.macrumors.com/showthread.php?p=7861620&posted=1#post7861620
To enable tethering in 3.0! I know off topic but I thought it was worth it! :)
more...
Blackhatch
Apr 4, 09:40 AM
"Plays nicely with the MAC" doesn't give a lot of information about what you're planning to use to edit on the Mac.
In general, however, most cameras shoot video that is made for playback, not editing. So, if you're planning to use FCP to edit, FCP can import many different formats and convert them to formats made for editing. In addition, there are free and not-free programs that can assist in converting your camera format to an editing format.
If you can provide more information about your needs, you'll probably get more informative responses.
Good luck.
I need to shoot some video (instructional and informative) that I will do voice overs on for clarity and proper content.
Nothing crazy on the editing, just streamlining the video and maybe taking proper cuts from another video and pulling it in.
In general, however, most cameras shoot video that is made for playback, not editing. So, if you're planning to use FCP to edit, FCP can import many different formats and convert them to formats made for editing. In addition, there are free and not-free programs that can assist in converting your camera format to an editing format.
If you can provide more information about your needs, you'll probably get more informative responses.
Good luck.
I need to shoot some video (instructional and informative) that I will do voice overs on for clarity and proper content.
Nothing crazy on the editing, just streamlining the video and maybe taking proper cuts from another video and pulling it in.
Sparky's
Nov 7, 08:28 PM
InCrease seems to be working fine I went from #139 to #132 in 3 days using it on all my machines :D
more...
Rekutyn
Dec 23, 01:17 PM
-snip-
simX
Dec 21, 06:44 PM
Originally posted by Koyder
I guess the Star Wars kid can now kiss the "2003's Lamest" award goodbye...
Hahaha good one. Although SpyMac was always a contender for that award.
I guess the Star Wars kid can now kiss the "2003's Lamest" award goodbye...
Hahaha good one. Although SpyMac was always a contender for that award.
more...
Applejuiced
May 1, 07:10 PM
Yes, if it has the iPad bb it won't restore to official firmware.
Only to custom jb Ipsw.
Only to custom jb Ipsw.
zero2dash
Mar 16, 01:01 PM
An obvious & essential 800 point purchase :)
Don't you have enough games to play through already? LMFAO
j/k MRU :D
Don't you have enough games to play through already? LMFAO
j/k MRU :D
more...
Doctor Q
Dec 10, 10:53 AM
Note to voters: Your user name will appear in the poll results so others will know who plans to be at the MeetUp!
dwright1974
Apr 13, 04:32 PM
Not as big a hassle as yours but I ordered a TV off pixmania (UK) and it came with a Euro plug. Phoned to complain and they sent me an adapter.
Not a big deal but I was a bit miffed that they didnt advertise it as Eur plug. I'm a bit paranoid about having it plugged to an adapter all the time (not sure why!)
Pixmania is owned by DSGi - yes, the dreaded Currys, PC World cowboys!!
I was once going to buy a camera from there because it was so cheap. Thankfully, the 'If it's too good to be true ..." adage sprang to mind didn't go through with it.
- D
Not a big deal but I was a bit miffed that they didnt advertise it as Eur plug. I'm a bit paranoid about having it plugged to an adapter all the time (not sure why!)
Pixmania is owned by DSGi - yes, the dreaded Currys, PC World cowboys!!
I was once going to buy a camera from there because it was so cheap. Thankfully, the 'If it's too good to be true ..." adage sprang to mind didn't go through with it.
- D
more...
Intell
Apr 27, 04:04 PM
If it does have a Beta of Mac OS X it would be of Jaguar, 10.2. But I think that it is very unlikely that an OS would stay intact on a computer that of this vintage, if it even has a hard drive.
wdlove
Sep 23, 01:14 PM
It seems that we will have to wait for the official word from Apple. I hope that it isn't closed for good though.
jrohlman88
May 6, 10:08 PM
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_2_8 like Mac OS X; en-us) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8E401 Safari/6533.18.5)
Yep! Don't rely on the Best Buy web site. I called around and they had the new iMac's in stock and on sale! Just picked mine up.
On sale by how much?
They were on sale for about $100 less than normal. Not much but hey, that's one less payment I have to make
Yep! Don't rely on the Best Buy web site. I called around and they had the new iMac's in stock and on sale! Just picked mine up.
On sale by how much?
They were on sale for about $100 less than normal. Not much but hey, that's one less payment I have to make
Kwyjibo
Jul 6, 10:02 PM
I'm assuming its all charged up/plugged in so I'll go from there with things you've probably alreayd done
1. reset pmu/ change powersource
2. reset pram
3. check to see if the machine's backlight is off....can you hear any noises?
4. try booting from a cd ?
good luck, but if this fails you'll probably be listenting to the genius estiamte the repair time/cost
1. reset pmu/ change powersource
2. reset pram
3. check to see if the machine's backlight is off....can you hear any noises?
4. try booting from a cd ?
good luck, but if this fails you'll probably be listenting to the genius estiamte the repair time/cost
ReunionComputer
Apr 14, 12:10 PM
Where is the Engraines of macbook , any one can help me here ?
helloo ?!
helloo ?!
evoluzione
Sep 14, 08:46 AM
i never knew that, i'm in NY state and have been looking at diesels lately, but not had much luck, now i know why.
i've been interested in a VW Golf, and running it of biodiesel/fryer oil etc.
i've been interested in a VW Golf, and running it of biodiesel/fryer oil etc.
Psilocybin
Apr 18, 07:43 PM
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_3_1 like Mac OS X; en-us) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8G4 Safari/6533.18.5)
Paper towel? Might as well take a knife to it haha
Paper towel? Might as well take a knife to it haha
mif
Apr 12, 01:15 AM
or vice versa
No comments:
Post a Comment