Longey Nowze
Dec 22, 08:23 AM
I found nice... spymac is nice nice it has some neat features so people please forget about the iWalk!
thanks
MaT
thanks
MaT
MacRumorUser
Mar 20, 11:54 AM
Nice way of telling me it's worth avoiding :D
You read into that what you wanted to hear.
There's nothing to avoid really. It's near the best version of lemmings since the Amiga ones.
Faults are the no mouse support, but in fairness the controller works very well. And 40 levels wont last you forever.
But like I say for �3.50 can you really complain ?
Well as it's you Jimmi - the answer is probably ;) :p :D j/k
You read into that what you wanted to hear.
There's nothing to avoid really. It's near the best version of lemmings since the Amiga ones.
Faults are the no mouse support, but in fairness the controller works very well. And 40 levels wont last you forever.
But like I say for �3.50 can you really complain ?
Well as it's you Jimmi - the answer is probably ;) :p :D j/k
PBF
Mar 8, 11:17 PM
Dot the i's and cross the t's.
Ladybug
May 2, 01:04 PM
Drag the .app to the trash. Don't use cleanmymac, appzapper, appcleaner or any crap like that.
Ugh, I just bought CleanMyMac. Could you elaborate more why these products are bad to use? Thanks
Nevermind: I see someone just addressed my question as I was posting.
Ugh, I just bought CleanMyMac. Could you elaborate more why these products are bad to use? Thanks
Nevermind: I see someone just addressed my question as I was posting.
more...
iccy82
Jun 20, 10:04 PM
iccy :eek:
cause Spymac is hated around the Mac web
cause they ban innocent victims :D
cause Spymac is hated around the Mac web
cause they ban innocent victims :D
w8ing4intelmacs
Feb 29, 04:46 PM
i'll take the flawed one. im sending money now
more...
Transporteur
Apr 12, 10:03 AM
Nope. No boot support for OS X as of yet.
RobertD33
Jul 6, 07:39 PM
I'm planning on camping out at the bardstown AT&T. Anyone else?
more...
ZiggyZidel
May 3, 08:11 PM
Simple question...
on the '11 models... would bootcamp be good on a 13'' (either model)? and how much of a difference would there be in a 15'' (low end)?
Thank you :)
on the '11 models... would bootcamp be good on a 13'' (either model)? and how much of a difference would there be in a 15'' (low end)?
Thank you :)
Applejuiced
Mar 14, 01:03 PM
This joke is funny and not over used at all. My favorite part is when you take a shot at the dev team and make your release date a long time away.
Apparently you're one of those guys who believes that the dev team owes you a jailbreak. Honestly if I had one I'd troll all the people like you, who tell the dev team they suck and go ahead and use their jailbreak anyway.
Well said.
Apparently you're one of those guys who believes that the dev team owes you a jailbreak. Honestly if I had one I'd troll all the people like you, who tell the dev team they suck and go ahead and use their jailbreak anyway.
Well said.
more...
MikePA
Feb 20, 05:56 PM
Well... it WILL set a precedent and you will see apple going after jailbreakers...
The Library of Congress already rule jb is legal. Try again.
And they have MORE muscle than SONY.
Whatever 'muscle' is? All you need to sue someone is money and both Apple and Sony have more than enough.
The Library of Congress already rule jb is legal. Try again.
And they have MORE muscle than SONY.
Whatever 'muscle' is? All you need to sue someone is money and both Apple and Sony have more than enough.
NicoleRichie
Oct 28, 05:11 PM
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_1 like Mac OS X; en-us) AppleWebKit/532.9 (KHTML, like Gecko) Version/4.0.5 Mobile/8B117 Safari/6531.22.7)
update was needed! When do you think we will see Logic 10?
update was needed! When do you think we will see Logic 10?
more...
acedickson
May 5, 01:22 AM
I bought the be.ez LA robe sleeve (http://www.amazon.com/100572-Sleeve-13-3-Inch-Macbooks-Wasabi/dp/B0015R819O/ref=sr_1_1?ie=UTF8&qid=1304576401&sr=8-1) as well as the Vyper XS3. I kept the be.ez sleeve because of the price point vs. the extra protection provided by the Vyper XS3, although I really liked it too. The be.ez sleeve is sturdy enough, surprisingly, but wouldn't protect as well as the Vyper XS3 in a major drop.
Chupa Chupa
May 4, 08:06 PM
Can I run two external displays from the 21" iMac? One from mini dp with vga converter and one from thunderbolt to vga or hdmi? It looks like the graphics card only supports one external display by the specs.. so what would be the point of using the thunderbolt over the mini display port right?
I would get a 21.5" iMac to go with my two 22" ips monitors if I knew it could work...
No. There is only one TB/MDP port (they share the same connector) on the 21". Only the 27" has two.
I would get a 21.5" iMac to go with my two 22" ips monitors if I knew it could work...
No. There is only one TB/MDP port (they share the same connector) on the 21". Only the 27" has two.
more...
codymac
Apr 8, 01:30 PM
Interesting.
I've been futzing with the same thing for the past couple of evenings. My purpose has been to see if it's possible to pull back the value from the ALS and scale/modify the point at which the keyboard lights turn on & off. Up until this point, I've just been trying unsuccessfully to capture the ALS value.
FWIW, your code doesn't work for me, but your call, in my code, seems to (replacing my malformed IOConnectCallScalarMethod with your IOConnectCallMethod). Thanks for that.
:)
I think it's the part about accessing the ALS that might keep it out of the App Store. It was my understanding, when I tried to find some information, that this is the part that's unpublished.
I've been futzing with the same thing for the past couple of evenings. My purpose has been to see if it's possible to pull back the value from the ALS and scale/modify the point at which the keyboard lights turn on & off. Up until this point, I've just been trying unsuccessfully to capture the ALS value.
FWIW, your code doesn't work for me, but your call, in my code, seems to (replacing my malformed IOConnectCallScalarMethod with your IOConnectCallMethod). Thanks for that.
:)
I think it's the part about accessing the ALS that might keep it out of the App Store. It was my understanding, when I tried to find some information, that this is the part that's unpublished.
ciTiger
Apr 22, 02:13 PM
This buys more time for Apple to launch the iPhone 5 :p
more...
tekkierich
Feb 18, 10:55 AM
Hi Guys & Gals,
I'm going to make the jump to an Intel SSD this weekend to replace my stock 320GB (5400 RPM) Drive in the 2010 Mac Mini.
Those of you that have actually done this, did you find that the Logic Board really needed to be shifted at all? I've been looking at the OWC installation Video and it would seem to me that the drive will lift out over the Logic Board without moving the board at all. It would mean that I would only have to detach the first SATA and two heat connectors. The least amount of connectors I have to pull the better I would assume. Also, I'm thinking that the black vinyl covering wrapped around the 320GB drive is there to protect the moving/electrical drive components on the bottom of the drive, which I would not need on the SSD. I know that I need/should replace the piece of tape to hold the heat sensor wire on the new SSD.
Any help would be great.....:)
2010 Mac Mini (2.4MHz - 8GB RAM Intel 80GB SSD(pending)) Air Port Extreme, 2TB Mini Stack External Dive, 16GB WiFi iPad, 32GB iPhone 3GS.
I have not done an SSD per say, but I have made a little side business upgrading the hard drive on 2010 Mac Mini's and selling them on ebay. After having done 10 or so of these, yes you do need to pull the logic board out slightly. The hard drive will not lift up enough to give you the angle you need clear the logic board with out pulling it out.
That said, only pull it out enough to see a small gap of air between the black beisl in the rear and the alum case.
WRT the heat sensors... I have found that the smallest amount of rubber cement works well if you you loose the adhesive when transferring the sensor. 8/10 times you will have plenty of stick left though and wont need to add any.
The black cover I have also assumed was there for air flow as well. If the SSD has a smooth surface, and no logic board to short, you probably can do away with it.
I'm going to make the jump to an Intel SSD this weekend to replace my stock 320GB (5400 RPM) Drive in the 2010 Mac Mini.
Those of you that have actually done this, did you find that the Logic Board really needed to be shifted at all? I've been looking at the OWC installation Video and it would seem to me that the drive will lift out over the Logic Board without moving the board at all. It would mean that I would only have to detach the first SATA and two heat connectors. The least amount of connectors I have to pull the better I would assume. Also, I'm thinking that the black vinyl covering wrapped around the 320GB drive is there to protect the moving/electrical drive components on the bottom of the drive, which I would not need on the SSD. I know that I need/should replace the piece of tape to hold the heat sensor wire on the new SSD.
Any help would be great.....:)
2010 Mac Mini (2.4MHz - 8GB RAM Intel 80GB SSD(pending)) Air Port Extreme, 2TB Mini Stack External Dive, 16GB WiFi iPad, 32GB iPhone 3GS.
I have not done an SSD per say, but I have made a little side business upgrading the hard drive on 2010 Mac Mini's and selling them on ebay. After having done 10 or so of these, yes you do need to pull the logic board out slightly. The hard drive will not lift up enough to give you the angle you need clear the logic board with out pulling it out.
That said, only pull it out enough to see a small gap of air between the black beisl in the rear and the alum case.
WRT the heat sensors... I have found that the smallest amount of rubber cement works well if you you loose the adhesive when transferring the sensor. 8/10 times you will have plenty of stick left though and wont need to add any.
The black cover I have also assumed was there for air flow as well. If the SSD has a smooth surface, and no logic board to short, you probably can do away with it.
kdoug
May 5, 07:42 PM
Hi all,
Just curious to see how many have a apple laptop and and Ipad. Work just bought me a MBP last week and I already have a Ipad 2. Just trying to justify the two, maybe I sell the ipad 2 because I have to keep the laptop. By the way, I love both of them...I use the Ipad 2 for reading books, magazines etc...
Thanks for the comments or thoughts...
I sold my iPad 2 and purchased the MacBook Pro. It's not about money, it had more to do with justification. I will forever miss some of the games on my iPad but that's about it. Netflix looks way better on my MacBook.
Just curious to see how many have a apple laptop and and Ipad. Work just bought me a MBP last week and I already have a Ipad 2. Just trying to justify the two, maybe I sell the ipad 2 because I have to keep the laptop. By the way, I love both of them...I use the Ipad 2 for reading books, magazines etc...
Thanks for the comments or thoughts...
I sold my iPad 2 and purchased the MacBook Pro. It's not about money, it had more to do with justification. I will forever miss some of the games on my iPad but that's about it. Netflix looks way better on my MacBook.
scirica
May 5, 02:31 PM
I just removed AdSheet from my iP4 via SSH and ended this annoyance once and for all. No ill effects whatsoever. I was getting the same result when I ran Accuweather, another app that runs iAds. Not any more!!
patrick0brien
Feb 9, 04:38 PM
I think it would be particularly interesting to chart it back to the computer on the LEM of Apollo 11.
I remember something about the IBM Thinkpad 760XL I had in 1997 being something like 1,600x faster than it.
I remember something about the IBM Thinkpad 760XL I had in 1997 being something like 1,600x faster than it.
tkermit
Sep 14, 10:05 PM
I threw it back where it came from.
Awesome! :)
Awesome! :)
CubusX
Aug 3, 10:30 AM
This does look like iOS4 is turning into Apple's Vista. I've begun noticing odd quirks with my iPhone 4. Frequently, the screen refuses to shift into landscape or portrait mode when I turn it. The only thing that seems to fix the problem is a re-boot of the phone. Reception is still wonky. In the exact same location it will shift from 5 bars of 3G to 1 bar of EDGE, then 1 bar of 3G and then to 3 bars of EDGE. I've had several bizarre syncing problems when either iTunes or iPhoto reported simply, "An error has occurred."
When it works, it's great. But it certainly has been more finicky than my old 3G, which was rock-solid.
I have noticed this as well, a reboot usually helps. It is very annoying though.
Other things I have noticed:
1) The screen tends to take time to come one (once in a while) when the power button is pressed (when in sleep mode).
2) The color on the Calendar's is incorrectly sync'ed from my MacBook Pro.
As of right that is all I have noticed, it is a simple fix through the software. Hopefully it comes along quick.
When it works, it's great. But it certainly has been more finicky than my old 3G, which was rock-solid.
I have noticed this as well, a reboot usually helps. It is very annoying though.
Other things I have noticed:
1) The screen tends to take time to come one (once in a while) when the power button is pressed (when in sleep mode).
2) The color on the Calendar's is incorrectly sync'ed from my MacBook Pro.
As of right that is all I have noticed, it is a simple fix through the software. Hopefully it comes along quick.
lOUDsCREAMEr
Sep 28, 09:17 PM
it makes safari snappier :D
im an idiot :rolleyes:
im an idiot :rolleyes:
CodeJingle
Jun 17, 03:30 PM
What about the WWDC 2009 videos? They aren't up for sale anymore and they don't appear to be part of the free offerings for registered developers. Can anyone confirm whether or not the 2009 videos were added with the 2010 videos?
No comments:
Post a Comment